Denali D2S (Single Intensity) LED Lighting 2-Light Kit with Full Wiring Harness and M8 Mount
Item No: TT-D2S
| Our Price: | $309.99 |
Manufacturer: twistedthrottle.com
Related Products
Denali D2 LED Lighting 2-Light Kit with Full Wiring Harness and M8 Mount - Single Intensity
The second generation in Denali LED Lighting from Twisted Throttle. The Denali D2S is a single intensity alternative. This single intensity light has the same brightness as the high (full intensity) setting of the D2D dual intensity light.
When bright isn’t bright enough, grab a set of Denali D2 LED lamps. Advances in super-swanky LED technology have increased the effective light output of our Denali D1 system by nearly 70% without increasing the electrical power draw to your motorcycle. Consuming only 10 watts (0.83 amps at 12 volts DC) of power per lamp, it throws a blazing beam of light in front of you nearly twice as bright as the beam generated by the original Denali D1.
Yeah, but how many lumens is it?
This is a hard item to describe in terms of lumens yet, that is the measurement tool most LED lights have been measured by up to this point - Including the Denali D1 (900 lumens). Lumens is a measure of visible light AT THE SOURCE before the light is "driven" from the source . The Denali D2 uses a new patent pending driver to drive a more efficient MCE LED by Cree, Inc. vs the P7 LED by Seoul Semiconductor in the Denali D1.
The D1 uses a P7 LED that the manufacturer of the LED Seoul rates at 900 lumens.
The D2 uses a MCE LED that the manufacturer of the LED Cree rates at 860 lumens.
The Driver, not the input voltage determines at what forward current the led is driven. At a forward current of 2800milli amp the P7 led would have 900 lumens and the MCE led 860 Lumens.
Therefore the higher the input voltage the lower the amp draw, the light output will remain the same on either the Denali D1 or the Denali D2, no matter the input voltage.
The way we are able to get 70% more useable light form the D2 is through our patent pending Prime Drive technology. Unfortunatley we cannot reveal exactly how it works as the patent is still pending.
- The Smart LED - With Prime Drive Technology you are getting the most light possible. The most Lumen s per LED while prolonging the life of the LEDs and maintaining the lowest amp draw possible.
- Electronic Thermal Management - ETM monitors the heat output of the LEDs in order to maintain safe operating temperatures and prolong the LED life span to its full 50,000 hour potential.
- Driven - The Denali D2 is driven at 90%, meaning less energy wasted and more light output. This allows for the most lumen s while maintaining the optimal operating conditions for the LEDs.
- Pure - With 90% optically pure optics, you can be sure that you are getting the most distance and most accuracy out of each LED.
As with the Denali D1 system, the D2 is housed in a rugged waterproof 2” aluminum housing (submersible to 3 meters underwater). The LED boasts an average life of over 50,000 hours (6+ years) without ever being shut off. Yup, we went overboard. It’s what we do. Limited Lifetime Warranty - See Related Files section at the bottom of the page for complete details.
A few installation tips for installing the Denali D2s on the BMW R1200GS CLICK HERE
Kit components:
- 2 x Denali D2 LED light pods
- Wiring Harness with Relay and Lighted Switch
- 2 x universal M8 mounting brackets
- 2 x spot driving beam lenses (10 degree beam pattern)
- 2 x flood beam lenses (25 degree beam pattern)
- Installation instructions
The Denali LEDs are housed in a rugged die-cast aluminum housing for optimum durability and heat dissipation. The housings are IP68 (ingress protection) rated so that they're impenetrable to dust and submersible under water up to 3 meters. The unbreakable polycarbonate lenses are housed by a 6061 aluminum face plate which doubles as a radiant heat sink to melt away snow and ice in frigid conditions. The Denali D2 LEDs have been subjected to a 14Grms vibration test to ensure their performance in high impact conditions.
The Denali D2 has integrated Prime Drive Technology into this updated LED light to bring the most powerful light per cubic inch onto the market. This auxiliary LED lighting kit has a 50,000 hour lifespan, and Electronic Thermal Management all with extremely low amp draw making this the most advanced LED light pod on the market.
This kit includes interchangeable lenses that allow you optic patterns of 10° (Spot) or 25° (Flood).
|
|
This Denali D2 kit is designed to be a single intensity light (TT-D2S). If you are interested in a Denali D2 light kit with both high and low beam intensity function order the Denali D2D (Dual Intensity).
Have you already purchased this single intensity Denali Kit and decided to add the Dual Intensity feature? Not a big problem... Just order the upgraded wiring harness: TT-D2D.H.
Installation Notes:
- We have noticed that the interlink and associated channel on the LED pod have very tight tolerances. It may be that you find that the interlink does not want to seat. In this case apply a light tap to the interlink to slide it in far enough to allow the M3 bolt to gain purchase.
- Be certain to plug the light switch into the proper port and the light pods as well. Premture failure can result if done improperly.
Application Chart Since we incorporated the same mounting design into the D2 System the D1 & D2 lights are interchangeable on any known good mounting application.
Description: Quickly "unravel" the components comprising the Denali 2 wiring harness. This short video will help you to identify the leads and help you differentiate between pod and trigger plugs.
| Aprilia | Start Year |
End Year |
Mounting Kit |
Fitting Notes |
|---|---|---|---|---|
| RSV1000 | 2004 | 2006 | Lower front fender bolt position | |
| BMW | Start Year |
End Year |
Mounting Kit |
Fitting Notes |
| F650CS | all | all | Lower front fender bolt position | |
| F650GS single | 00 | 07 | (fairing mount kit, select bike from drop-down menu above) | |
| G650GS | 09 | 10 | (fairing mount kit, select bike from drop-down menu above) | |
| F650GS twin | 08 | 10 | (fairing mount kit, select bike from drop-down menu above) | |
| F650GS twin | 08 | 10 | (fender mount kit) | |
| F800GS | 08 | 10 | (fairing mount kit, select bike from drop-down menu above) | |
| F800GS | 08 | 10 | ||
| F800R | 09 | 10 | ||
| F800S & F800ST | all | all | ||
| K1200GT | 02 | 05 | ||
| K1200GT | 06 | 08 | ||
| K1200R | all | all | ||
| K1200S | - | 06 | Production dates before 03/2006 | |
| K1200S | 06 | 08 | 03/2006 and later production dates | |
| K1300GT | 09 | 10 | ||
| K1300R | 09 | 10 | ||
| K1300S | 09 | 10 | ||
| R1150GS | | | ||
| R1200GS | 08 | 10 | (Auxiliary light bar, select bike from drop-down menu above) | |
| R1150R | all | all | Lower front fender bolt | |
| R1200RT | all | all | ||
| R1200ST | all | all | ||
| S1000RR | 09 | 10 | ||
| Ducati | Start Year |
End Year |
Mounting Kit |
Fitting Notes |
| 749 | 04 | 07 | ||
| 999 | 03 | 07 | ||
| Hypermotard | all | all | ||
| Monster (most models) | all | all | ||
| Multistrada 620, 1000, & 1100 | 04 | 09 | ||
| Multistrada 1200 | 10 | - | Connect white trigger wire to bike's GPS accessory lead | |
| ST2 | 98 | 07 | ||
| ST3 | 04 | 07 | ||
| ST4 | 00 | 07 | ||
| Streetfighter | 09 | 10 | ||
| Harley-Davidson | Start Year |
End Year |
Mounting Kit |
Fitting Notes |
| Fatboy | all | all | ||
| Heritage | all | all | ||
| Sportster | all | all | ||
| V-Rod | all | all | For use on fender bolts | |
| V-Rod | all | all | For use on headlight mounting bolt points | |
| Honda | Start Year |
End Year |
Mounting Kit |
Fitting Notes |
| 599 | all | all | ||
| 919 | all | all | (fender mount kit) | |
| 919 | all | all | none | (mounts to stock headlight using existing hardware) |
| CBR1000RR | 04 | 10 | ||
| CBR600RR | 04 | 10 | ||
| CBR1100XX | all | all | ||
| CBX | all |
all |
||
| Goldwing GL1800 | all | all | ||
| NT700V | 10 | 10 | ||
| Shadow (most models) | all | all | ||
| Silverwing | all | all | ||
| ST1100 | 98 | 02 | ||
| ST1300 | 03 | 10 | ||
| Valkyrie | 97 | 07 | ||
| Varadero XL1000V | all | all | Lower front fender bolt | |
| VFR800 | 02 | 10 | ||
| VTR1000F Superhawk | all | all | ||
| VTX1300 | all | all | ||
| VTX1800 | 04 | 10 | ||
| Kawasaki | Start Year |
End Year |
Mounting Kit |
Fitting Notes |
| Concours GTR1000 | - | 07 | example1 example2 | |
| Concours GTR1400 | '08 | 10 | ||
| ER6N | all | all | ||
| KLR650A | 86 | 07 | Fender mount kit uses front fairing subframe bolt position. See photo. | |
| KLR650E | 08 | 10 | (Twisted Throttle fairing mounts, select bike from drop-down menu above) | |
| KLR650E | 08 | 10 | Fender mount kit replaces side reflectors on forks and requires the 2 original M6 nuts | |
| Ninja 250R | 08 | 10 | ||
| Ninja 500R | all | all | ||
| Ninja 650R | all | all | ||
| Super Sherpa | all | all | ||
| Versys | all | all | ||
| Vulcan (most models) | all | all | ||
| Z1000 | all | all | ||
| ZRX1100 | all | all | ||
| ZRX1200R | all | all | ||
| ZX6R | all | all | ||
| ZX10R | all | all | ||
| ZX14 | all | all | ||
| ZZR600 | all | all | ||
| KTM | Start Year |
End Year |
Mounting Kit |
Fitting Notes |
| 950/990 Adventure | all | all | ||
| Suzuki | Start Year |
End Year |
Mounting Kit |
Fitting Notes |
| B-King | all | all | ||
| Bandit 650 & 1250 | all | all | ||
| Burgman 400 | all | all | ||
| Burgman 650 | all | all | ||
| Boulevard (most models) | all | all | ||
| DR-Z400S & DR-Z400SM | all | all | ||
| DR650SE | all | all | ||
| Gladius | all | all | ||
| GS500F | all | all | Fender mount kit replaces original side reflectors on forks | |
| GSX650F | all | all | Fender mount kit replaces original side reflectors on forks | |
| GSX1250F | all | all | Fender mount kit replaces original side reflectors on forks | |
| GSX-R600 | all | all | ||
| GSX-R750 | all | all | ||
| GSX-R1000 | all | all | ||
| GSX1300R/GSX1340R Hayabusa | 99 | 10 | ||
| SV650 & SV650SF | all | all | ||
| SV1000 | all | all | ||
| TL1000 | all | all | ||
| V-Strom DL1000 | all | all | (Twisted Throttle auxiliary light bar, select bike from drop-down menu above) | |
| V-Strom DL650 | all | all | (Twisted Throttle auxiliary light bar, select bike from drop-down menu above) | |
| V-Strom DL1000 | all | all | (fender mounting kit) | |
| V-Strom DL650 | all | all | (fender mounting kit) | |
| Triumph | Start Year |
End Year |
Mounting Kit |
Fitting Notes |
| Bonneville | all | all | ||
| Rocket III | all | all | ||
| Speed Triple | all | all | ||
| Sprint ST | all | all | ||
| Tiger 1050 | all | all | (Twisted Throttle auxiliary fairing mount, select bike from drop-down menu above) | |
| Tiger 1050 | all |
all |
Fender mount kit bolts to top fender bolt position |
|
| Tiger 800 & 800XC | '11 | - | Fender mount kit bolts to top fender bolt position or Bike Specific mount with M8 hinge (included) | |
| Tiger 955 | - | 06 | ||
| Trophy | 97 | 03 | ||
| Victory | Start Year |
End Year |
Mounting Kit |
Fitting Notes |
| Kingpin | all | all | ||
| Yamaha | Start Year |
End Year |
Mounting Kit |
Fitting Notes |
| FJR1300 | all | all | ||
| FZ1 | all | all | ||
| FZ6 & FZ6R | all | all | ||
| R1 | all | all | ||
| R6 | all | all | ||
| Road Star | all | all | ||
| Roadliner | all | all | ||
| Royal Star | all | all | ||
| Stratoliner | all | all | ||
| V-Max 1200 | - | 07 | ||
| V-Star | all | all | ||
| XT1200Z Super Ténéré | all | all | ||
| Warrior | all |
all |
*The universal M8 bracket included with this kit will allow you to mount the Denali lights to many, many more bikes than are listed above. Give us a buzz or send us some pictures of your bike if you need more help with mounting suggestions.
Comments (0)
Be the first to write a comment!